Bosch ICP-EZM2, Справочное руководство системы

Страница: 88 / 126

88 en | Device Specifications and Overview Easy Series
F01U087835 | 02 | 2008.10 System Reference Guide Bosch Security Systems, Inc.
Table 10.7 wLSN Key Fob LEDs and Buttons
Table 10.8 wLSN Key Fob LED Status
Programmable buttons
To operate the programmable buttons, press and hold or for at least one sec.
Program these buttons at the control panel to control lights, garage doors, and so on.
Refer to Expert Programming Items 616 and 626 on page 56.
High intensity LED
button
Press [FIG] to operate the high intensity LED.
LED/Button Function
Status Description
Alternating red and green A key fob button was pressed. The LED either stops flashing, or one of the other status
indicators in this table occurs. This display lasts approximately for 15 sec.
Red fast flash The system is in alarm, or silent panic feature was used.
Red slow flash Exit delay in progress (system occupied or unoccupied).
Red on steady The system is on (occupied or unoccupied).
Green fast flash An error occurs while turning the system on. The system does not turn on as expected.
Green slow flash The system is not ready to turn on. A button programmed for system status also shows
this status.
Green on steady The system is off and is ready to turn on. The button programmed for system status
also shows this status.
Green on steady and slow
amber flash
Either or was pressed to turn an output on or off.
Red on steady and slow
amber flash
Either or was pressed to turn an output on for two seconds.
Red blip If the LED flashes red once every 5 sec when the key fob is not in use, replace the
batteries.