English |
49
Bosch Power Tools
1 609 929 X56 | (22.1.11)
Storage and Transport
Storing Product Features (see figures Y1–Y6)
For storage purposes, certain product features
can be securely fastened to the power tool.
– Loosen auxiliary parallel guide
37
from paral-
lel guide
10
.
– Attach all loose tool parts to their storage lo-
cations on the housing. (see Table)
Carrying the Power Tool
Before transporting the power tool, the follow-
ing steps must be carried out:
– Bring the machine into the transport posi-
tion. (see “Transport Position”, page 44)
– Remove all accessories that cannot be
mounted firmly to the power tool.
If possible, place unused saw blades in an
enclosed container for transport.
– Slide the saw-table extension
14
completely
to the rear and press tensioning lever
15
downward to lock it.
– Wind the mains cable around the cable hold-
er
29
.
– For lifting or transport, use the recessed
handles
4
or the carrying handle
13
.
f
When transporting the power tool, use only
the transport devices and never use the
protective devices.
f
The power tool should always be carried by
two persons in order to avoid back injuries.
Figure
Product Feature
Storage Location
Y1
Blade guard
6
Insert into the recess of fixture
33
and tighten with clamp-
ing lever
8
Y2
“Auxiliary parallel guide”
fastening kit
38
Clip into the holders
65
Y2
Extraction adapter
32
Insert into retaining clamp
66
Y3
Ring spanner
22
Fasten in tool depot with fastening nut
67
Y3
Push stick
23
Mount onto fastening nut
67
and fasten by turning
Y4
Parallel guide
10
Turn guide around and hang it into the guide rails from be-
low; tighten clamping handle
35
Y5
Allen key
21
Allen key
64
Insert into holders
68
Y5
Angle stop
3
Insert into retaining clamp
69
Y6
Auxiliary parallel guide
37
Insert into retaining brackets
30
(short side goes on top;
long side toward the rear)
OBJ_BUCH-1325-001.book Page 49 Saturday, January 22, 2011 12:54 PM
