Bosch DIP-73G0-00N Скачать руководство пользователя страница 38

Страница: 38 / 44

en | Maintenance

DIVAR IP all-in-one 7000 3U

2021.10 | V02 | DOC

Installation manual

Bosch Security Systems B.V.

To replace a system fan:

If necessary, open the chassis while the power is running to determine which fan has
failed.

Note:

Never run the system for an extended period of time with the chassis open.

Turn off the power to the system and unplug the power cord from the outlet.

Remove the failed fan's power cord from the motherboard.

Press the fan release tab to lift the failed fan from the chassis and pull it completely from
the chassis.

1 - Release tab
2 - Airflow direction indicator

Place the new fan into the vacant space in the housing while making sure the arrows on
the top of the fan (indicating the airflow direction) point in the same direction as the
arrows on the other fans.

Reconnect the power cord, turn on the system and make sure that the fan is working
properly before replacing the chassis cover.

Replace the chassis cover.

10.11

Replacing the power supply

Warning!

Redundant power supplies
This unit might have more than one power supply connection. To de-energize the unit, remove
all connections.

LED status:

–

Amber lighted LED: The power supply is off.

–

Green lighted LED: The power supply is operating.

Содержание DIP-73G0-00N













































Результаты поиска

Содержание DIP-73G0-00N

Отзывы:

Похожие инструкции для DIP-73G0-00N

Бренды по названию

Популярные бренды

Bosch DIP-73G0-00N, Руководство по установке

Результаты поиска

Содержание DIP-73G0-00N

Отзывы:

Похожие инструкции для DIP-73G0-00N

Бренды по названию

Популярные бренды