36
en | Maintenance
DIVAR IP all-in-one 7000 3U
2021.10 | V02 | DOC
Installation manual
Bosch Security Systems B.V.
2
1
1
DVD-ROM
2
Front port panel
To replace the DVD-ROM drive:
1.
Turn off the unit and if necessary, remove the unit from the rack.
2.
Remove the chassis cover.
3.
Unplug the drives power and data cables from the motherboard and/or backplane.
4.
Locate the locking tab at the rear (on the left when viewed from front) of the DVD-ROM
drive. Push the tab toward the drive and push the drive unit out the front of the chassis.
5.
Insert the new drive unit in the slot until the tab locks in place.
6.
Reconnect the data and power cables.
7.
Replace the chassis cover. replace the unit in the rack, if necessary, then turn on the
system.
10.7
Replacing the front port panel
To replace the front port panel:
1.
Turn off and unplug the unit.
2.
Remove the chassis cover.
3.
Disconnect the power and data cables from the front port panel to other chassis
components including the motherboard and backplane.
4.
Remove the old port panel by depressing the release tab, then pulling the unit out of the
chassis.
5.
Insert the new front port panel unit in the slot until the tab locks into place.
6.
Connect the data and power cables to the backplane and motherboard.
2
1
1
DVD-ROM
2
Front port panel
Содержание DIP-73G0-00N
Страница 1: ...DIVAR IP all in one 7000 3U DIP 73G0 00N DIP 73G8 16HD DIP 73GC 16HD en Installation manual ...
Страница 2: ......
Страница 43: ......