Bosch DIP-73G0-00N, Руководство по установке

Страница: 28 / 44

28 en | System setup DIVAR IP all-in-one 7000 3U
2021.10 | V02 | DOC
Installation manual
Bosch Security Systems B.V.
8 System setup
The DIVAR IP all-in-one 7000 systems are based on the operating system Microsoft Windows
Server IoT 2019 for Storage Standard. The operating system provides an user interface for
initial server configuration, unified storage appliance management, simplified setup and
storage management, and support for Microsoft iSCSI Software Target.
It is specially tuned to provide optimal performance for network-attached storage. The
Microsoft Windows Server IoT 2019 for Storage Standard operating system provides
significant enhancements in storage management scenarios, as well as integration of storage
appliance management components and functionality.
i
Notice!
This chapter is valid for DIVAR IP all-in-one 7000 models that come with pre-installed hard
drives.
The operating system of empty units loaded with third party hard drives will start normally,
but the added hard drives must be configured with the
MegaRAID Storage Manager
application prior to initial software setup.
Refer to
– Configuring hard drives using the MegaRAID Storage Manager application, page 29
8.1 Default settings
All DIVAR IP systems are preconfigured with a default IP address and with default iSCSI
settings:
–
IP Address: automatically assigned by DHCP (fallback IP address: 192.168.0.200).
– Subnet mask: automatically assigned by DHCP (fallback subnet mask: 255.255.255.0).
Default user settings for administrator account
– User name: BVRAdmin
– Password: to be set at first logon.
Password requirements:
–
Minimum 14 characters.
– At least one upper case letter.
– At least one lower case letter.
– At least one digit.
8.2 Prerequisites
Observe the following:
–
DIVAR IP needs to have an active network link during installation. Make sure that the
network switch you are connecting to is powered on.
– The default IP address must not be occupied by any other device in the network. Make
sure that the default IP addresses of existing DIVAR IP systems in the network are
changed before adding another DIVAR IP.
8.3 Operating modes
Operating modes
The DIVAR IP all-in-one systems can operate in three different modes:
–
Full video recording and management system, utilizing the BVMS and VRM core
components and services: This mode allows for advanced video management features
such as event and alarm handling.
– Pure video recording system, utilizing the VRM core components and services.