Bosch DIP-73G0-00N, Руководство по установке

Страница: 13 / 44

DIVAR IP all-in-one 7000 3U System overview | en 13
Bosch Security Systems B.V.
Installation manual
2021.10 | V02 | DOC
3 System overview
3.1 Chassis components
This chapter describes the most common components included with your chassis. For more
information, see the installation instructions detailed later in this manual.
Component Description
Hard drives The chassis includes 16 hard drive bays for SATA hard drives.
These hard drives are hot swappable. Once setup correctly, these drives
can be removed without turning off the system.
In addition, these drives support SES2 (SATA).
Note: For empty chassis, the hard drives must be purchased separately.
For the latest shipping lists, see the datasheet in the online product
catalog.
DVD-ROM drive This drive allows you to quickly install or save data.
Fans The built-in fans provide 100% cooling redundancy, aided by an
adjustable air shroud. The fans are controlled through IPMI (Intelligent
Platform Management Interface).
Air shroud Air shrouds are shields, usually plastic, which conduct the airflow
directly to where it is needed to maximize fan efficiency. Always use the
air shroud included with your chassis.
Power supply The chassis has redundant power supplies. Redundant power supplies
are hot-swappable, and can be changed without turning off the system.
Each power supply is auto-switching capable. This enables the power to
automatically sense and operate at a 100 V to 240 V input voltage.
An amber light will be illuminated on the power supply when the power
is off.
An illuminated green light indicates that the power supply is operating.
I/O expansion
slots The chassis includes 7 full height full width expansion slots.
Mounting rails The unit can be placed in a rack for secure storage and use. To set up
your rack, follow the instructions included in this manual.
Control panel The control panel provides a monitoring and control interface. LEDs
indicate system status and buttons control system power.
3.2 Device views
The chassis includes a control panel on the front that features power buttons and status
monitoring LEDs. On the rear there are various I/O ports as well as power supply modules.