Bosch ATMO Station Скачать руководство пользователя

Страница: 18 / 62

Transport, installation, connection and dismounting

Page 3 / 9

EPA assembly line for DaeP

Assembly Station

VPP 21

Station x

Station 2

Station 3

Station 4

Station 5

Station 6

Station 7

Station 8

Station 9

Station 10

Station 11

Station 12

Station 13

Station 14

Station 15

Station 16

Station 17

Station 18

Station 19

Station 20

Station 21

Station 22

Station 23

Station 24

Station 25

Station 26

Station 27

Station 28

Station 29

Station 30

Station 31

Station 32

Station 33

Station 34

Station 35

Station 36

Station 37

Station 38

Station 39

Station 40

Station 50

Station 60

Station 70

Station 80

Station 90

Station 100

Station 110

Station 120

Station 130

Station 140

Station 150

Station 160

Station 170

Station 180

Station 190

Station 200

Station 210

Station 220

Station 230

Station 240

Station 250

Station 260

Station 270

M.3000314.190_0843.195.960 /

V0.0_0613_EN_PA--ATMO2



Robert Bosch GmbH

Transport

Preparation

Properly disconnect the machine from all energy supplies and links to other

machines or devices.

Remove all tools from the machine and pack them suitably.

Remove all fastening brackets.

Secure any moving and non----fastened parts.

Close any open ends of lines.

Pump off any liquids, if necessary, and dispose of them in a suitable way.

Unloading and transport

CAUTION!

The machines and relevant pack units may be unloaded and transported

only by a specialist company or by trained personnel who have received

safety instruction!

The center of gravity must be insured when lifting.

Some crates are marked with the symbols for the center of gravity

(ISOR/780 and in DIN 55 402). Transport bases do not have this

designation.

Notice!

The operating instructions are a part of the machine and must be handed

over whenever there is a change of location.

Содержание ATMO Station































































Результаты поиска

Содержание ATMO Station

Отзывы:

Похожие инструкции для ATMO Station

Бренды по названию

Популярные бренды

Bosch ATMO Station, Сборка

Результаты поиска

Содержание ATMO Station

Отзывы:

Похожие инструкции для ATMO Station

Бренды по названию

Популярные бренды