Bosch 0 607 350 198, Оригинальное руководство пользователя

Страница: 23 / 368

English | 23
Bosch Power Tools 3 609 929 C02 | (11.10.10)
Sanding Plate Selection
Depending on application, the air tool can be
equipped with sanding plates of varying hardness:
– Soft sanding plates: Suitable for polishing and
sensitive sanding, incl. on convex surfaces.
– Medium sanding plates: Suitable for all sand-
ing work; universally usable.
– Hard sanding plates: Suitable for high sand-
ing capacity on level surfaces.
Replacing the Sanding Plate
Note:
Replace a damaged sanding plate 9 imme-
diately.
– Pull off the sanding sheet
10 .
– Insert open-end wrench 7 under the height-ad-
justable extraction hood 6 and hold the sander
spindle in place with the open-end wrench.
– Unscrew the sanding plate 9 from of the
grinder spindle by turning counterclockwise.
Remove the washer
8 , place it on the new
sanding plate and screw it together with the
washer onto the grinder spindle, turning
clockwise.
Type 0 607 350 199|... 200
– The second washer
8 can be used additional-
ly so that the random orbit sander does not
adhere to the workpiece when the dust ex-
traction is activated.
Dust/Chip Extraction
f Dusts from materials such as lead-contain-
ing coatings, some wood types, minerals
and metal can be harmful to one’s health
and cause allergic reactions, lead to respi-
ratory infections and/or cancer.
Materials
containing asbestos may only be worked by
specialists.
– Use dust extraction whenever possible.
– Provide for good ventilation of the work-
ing place.
– It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
Red quality
– All wooden materi-
als (e.g., hard-
wood, softwood,
chipboard, building
board)
– Metal materials
For coarse sanding, e.g. of rough,
unplaned beams and boards coarse 40
60
For face sanding and planing small
irregularities medium 80
100
120
For finish and fine sanding of wood fine 180
240
320
400
Black quality
– Masonry, stone
– Marble
– Granite
– Ceramic
– Glass
– Plexiglas
– Automotive paint
– Corian®
– Varicor® For pre-sanding coarse 60
For shaping and braking edges medium 80
100
120
For final sanding and forming fine 180
240
320
400
For polish-sanding and rounding off
edges Very fine 600
1200
Sanding disc Material Application Grain size
OBJ_BUCH-1326-001.book Page 23 Monday, October 11, 2010 10:32 AM