BOMBARDIER Sea-Doo SPORTSTER LE, Дополнение к руководству по эксплуатации

Страница: 76 / 122

Section 05 COOLING SYSTEM
Subsection 02 (CIRCUIT, COMPONENTS AND CARE)
05-02-4
LMR2000_056_05_02A.FM
Regulated water is injected in the tuned pipe by a
calibrated fitting.
1. Injection fitting
CAUTION: Never modify cooling system ar-
rangement, otherwise serious engine damage
could occur.
COMPONENTS
Clamp
To remove non-reusable Oetiker clamps (where
applicable) of cooling system hoses, use screw-
driver.
1. Lift clamp tab
NOTE: If clamp cannot be removed using screw-
driver, cut clamp.
To cut or secure non-reusable Oetiker clamps use
pliers (P/N 295 000 070).
1. Cutting clamp
2. Securing clamp
TECHNICAL DATA
TYPE:
TLCS (Total Loss Cooling System).
COOLANT FLOW:
Pressure build-up at impeller housing
(no water pump).
TEMPERATURE CONTROL:
Calibrated outlet fittings (no thermostat).
SYSTEM BLEEDING:
Self-bleed type (hose at uppermost point of circuit).
SYSTEM DRAINING:
Self-drain type (hose at lowest point of circuit).
SYSTEM FLUSHING:
Fitting spigot or hose adapter.
MONITORING BEEPER:
Turns on at 86 - 94°C (187 - 201°F).
1
F06E0AA
F09E11A
1
1
F01B2KA
2