Section 04
ENGINE
Subsection 04
(MAGNETO)
04-04-4
LMR2000_052_04_04A.FM
Rotor and Flywheel
Apply Loctite 648 on mating surface of the rotor
no. 4
.
When reinstalling rotor to flywheel
no. 5
, one of
the protrusion end of rotor must be aligned with
hole in flywheel.
1. Protrusion
2. Hole
Apply Loctite 648 on screws
no. 7
retaining rotor
to flywheel and torque screws in a criss-cross se-
quence to 13 N•m (115 lbf•
in
).
Apply Loctite 243 on crankshaft taper.
1. Loctite 243 on crankshaft taper
Install flywheel and make sure to align keyway
with the crankshaft Woodruff key.
Apply Loctite 243 on nut
no. 6
. Install nut with lock
washer and torque to 115 N•m (85 lbf•ft).
CAUTION:
Never use any type of impact wrench.
Unlock crankshaft. Reinstall pulse fitting with
washer and torque to 19 N•m (14 lbf•ft).
Cover
Before installation, properly install O-ring
no. 3
in
engine magneto cover
no. 1
.
Apply Loctite 767 anti-seize compound on screws
no. 2
. Torque screws in a criss-cross sequence to
9 N•m (80 lbf•
in
).
F06D0OA
1
2
F06D24A
1
Содержание Sea-Doo SPORTSTER LE
Страница 1: ...219 100 097...
Страница 2: ...Shop Manual Supplement SPORTSTER LE Use in conjunction with Shop Manual Volume 1 P N 219 100 097...
Страница 122: ......
