BOMBARDIER BD-100-1A10, Руководство по эксплуатации

Страница: 481 / 544

NAVIGATION
Sep 13/2004 Flight Crew Operating Manual Volume 2
REV 1 CSP 100-6
17-01-05
VHF NAVIGATION SYSTEM (Cont)
TUNING REVERSION
Normally, the MFD provides the master tuning control. However, if the MFD fails or is reverted to a compressed PRF for-
mat, radio tuning through that MFD is no longer available. Tuning reversion allows the pilot to select either the MFD or
the CDU as the master tuning control. When the TUNE knob on the Reversion Selection Panel is set to MFD ONLY or
when the TUNE knob is set to CDU ONLY, the CDUs ignore tuning commands from the MFDs and the MFD radio menu
is blanked. When the TUNE knob is in the COM 1 121.50 position, tuning is as normal (MFD is the master tuning control),
but the COM 1 radio is forced to the emergency 121.50.
1. Turn the TUNE knob on the REVERSION panel to the desired position.
- The MFD ONLY position selects the MFDs as the only tuning control
- The CDU ONLY position selects the CDUs as the only tuning control
- The COM 121.50 position forces the COM1 radio to 121.50, but remains the MFD as the master tuner
CDU TUNING
The CDU provides tuning control of both the on-side and cross-side radios. Data entry to the CDU is made through the
scratchpad and the line select keys. Information is entered on the scratchpad, then transferred to the appropriate location
with the adjacent line select key. Warning messages show if the information entered is not appropriate for the data field.
Access to CDU tuning is via the TUNE page.
To tune the radio using the CDU execute the following steps:
1. Push the TUN key on the CDU to show the TUNE page.
2. To tune a radio directly, do one of the following steps:
- Enter the frequency into the scratchpad, then push the line select key for the appropriate radio
- Enter a preset channel number (1 through 20) into the scratchpad, then push the line select key for
the appropriate radio
- NAV radios only: Enter the three letter identifier for the NAVAID, then push the line select key for
the appropriate radio (NAV 1 or NAV 2)
3. To show the CONTROL page for a particular radio (to set presets, select modes, etc.), push the line select key for
the radio when the scratchpad is empty.
4. To return to the TUNE page from a CONTROL page, push the line select key for the radio or push the TUN key.