BOMBARDIER BD-100-1A10, Руководство по эксплуатации

Страница: 361 / 544

FLIGHT INSTRUMENTS
Dec 05/2006 Flight Crew Operating Manual Volume 2
REV 7 CSP 100-6
11-02-13
GRAPHICAL WEATHER (OPTIONAL) (Cont)
GWX IMAGE LIST
The select GWX image function allows the pilot to select from a list of available images to be displayed on the MFD. The
image can be displayed by selecting either the UPR or LWR FMT button. The GWX format must be selected on the MFD
first. After selecting GWX format the following images will be available:
- NEXRAD
- TOPS/MOVEMENT
- WINDS ALOFT
- ICING
- WX DEPICTION
- TURBULENCE
The following messages may be displayed on the MFD when the GWX format is active:
- GWX FAULT
- SUBSCRIPTION EXPIRED
- NOT RECEIVING DATA
- SIGMET OVERLAY INCOMPLETE - CHECK TEXT
DISPLAY LAST GWX IMAGE
The display last GWX image function allows the pilot to select the GWX display format with the last viewed GWX image
displayed on the MFD.
The display last GWX image function steps are as follows:
1. Push the UPR or LWR FRMT button on the MFD control to display the lower display FORMAT list.
2. Push the UPR or LWR FRMT button as necessary to cycle the display to the next available format until GWX is
selected. The GWX image displayed on the MFD is the last viewed GWX image.
New graphical weather images can be added to the list via the CDU. When the system receives a new image, the text mes-
sage NEW GWX is displayed on the MFD. The message is cleared by entry into the image list. The newest image to be
received is displayed at the top of the list. The CDU also displays the message RCVD just beside the requested image. As
long as images in the entry list have not been viewed, the message RCVD continues to be displayed on the CDU.
(Continued)