BOMBARDIER BD-100-1A10, Руководство по эксплуатации

Страница: 107 / 544

AIR CONDITIONING/PRESSURIZATION
Sep 14/2005 Flight Crew Operating Manual Volume 2
REV 4 CSP 100-6
02-04-11
DITCHING NOT AVAIL
The ditching switch has been selected On with
the pressurization switch in the manual mode
EQPT RACK TEMP
HIGH
TO/LAND The temperature in either equipment rack is high
PACK FAIL TO/LAND A failure has been detected in the PACK system
PACK LOOP FAIL TO/LAND
Both bleed air leak detection loops in the PACK
have failed during the power up self test
PACK TEMP HIGH TO/LAND
An overheat has been detected in the air condi-
tioning PACK system
L (R) PYLON LOOP
FAIL
TO/LAND
Both bleed leak detection loops in the respective
pylon have failed during the power up self test
TRIM AIR FAIL TO/LAND A hot air regulating valve has failed
TRIM AIR LOOP FAIL TO/LAND
The bleed air leak detection loops around the
trim air ducting have failed
XBLEED FAIL TO/LAND
The crossbleed valve has failed to move to the
commanded position
AIRCOND FAULT TO/LAND
A fault has been detected in the air conditioning
system or there has been a loss of temperature
sensing
BLEED LOOP FAULT TO/LAND
A fault has been detected in the bleed leak
detection loop system and redundancy is lost
L (R) BLEED FAULT TO/LAND
The bleed pressure data is invalid, or the
affected flow control valve is failed closed
CABIN ALT WARN
HIGH
LAND
A high airport takeoff or landing has been initi-
ated and the pressurization system is in the
automatic mode
EQPT RACK COOL
FAULT
TO/LAND
A fault has been detected in the avionics equip-
ment rack cooling system
MANUAL PRESS FAIL TO/LAND
The manual pressurization mode is not opera-
tional
PACK COOL AIR FAIL TO/LAND
The ram air regulating valve supplying cooling
air to the PACK heat exchanger has failed
RAM AIR FAIL TO/LAND
The RAM AIR ventilation valve has failed to
move to the commanded position
AIR COND MAN TEMP
ON
The air conditioning temperature control is in
manual mode
MESSAGE INHIBITS MEANING
AURAL
WARNING
REV 4