Version 1.05 / June 2008
BOMAR, spol. s r.o.
Extend 900.720
Těžební 1236/1
62700 Brno
CZECH REPUBLIC
52
5)
Release 4 screws.
5)
Release centric screws M10..
6)
Insert the pivot to the vice.
ATTENTION!!
The vice has aluminium jaws, eventually,
there has to be an aluminium agent to protect the pivot from
damage.
Remove the bearing pivot from the bearing holder by means
of the swager.
7)
Remove the worn bearing.
8)
Fasten the holder to the vice.
ATTENTION!!
The vice has aluminium jaws, eventually,
there has to be an aluminium agent to protect the pivot from
damage.
Insert the bearing and washers and ret urn the pivot to its
original place.
The pivot may not extend past the holder; otherwise, the
bundle gripping assembly regulator gets worse.
20.2. Saw band guiding pulleys replacement
