Version 1.05 / June 2008
BOMAR, spol. s r.o.
Extend 900.720
Těžební1236/1
62700 Brno
CZECH REPUBLIC
31
13.3. Adjusting band guides
Band guides are adjusted automatically together with vice.
13.4. Cutting speed adjusting
Speed of the saw band is possible change from 20 to 120
m/min. You can effect to adjusting speed of the saw band
following:
Use the frequency convertor
12
to adjust requested speed of
the saw band. You can see the band speed on display
1
during semi automatic cycle.
13.5. Adjustment of pressure in the cut
The band saw Extend 900.720 is equipped with cutting
pressure regulation on the both guiding cubes.
Note!
Guiding cubes are equipped with taps which must be
open during operation!
Pressure adjusting is performed with regulating wheel
(position
14
– control panel). The pressure to the cut is
displayed on the cutting pressure manometer
13
.
Lower
pressure set up by turning
counter-clockwise
.
Higher
pressure set up by turning
clockwise.
