44
RS422 Connection to the Decoder at Remote Site
At the remote site where the decoder is, connect the KBD-1010-RNV keyboard controller to the Dante AV decoder RS-
422 serial port (RJ45) to control the camera over Dante AV network.
Use POE to power up the controller. (12VDC power adapter that’s included with the keyboard can be used.)
1.
Use the included (Premade) Ethernet cable or T-568B Standard Ethernet cable direct connect between the
controller and the decoder.
2.
Or you can use CAT5/6 T-568B Standard Ethernet cable direct connect between the decoder and the controller
to make RS422 connection by following the pin definition below:
