37
Use IP PTZ Control
Within Dante AV network, it supports Visca Over IP protocol via Dante network.
VISCA over IP Control
With VISCA over IP function, you can control the camera using VISCA protocol on an IP controller via Dante
AV Network.
•
Bolin Dante AV PTZ camera supports Visca Over IP control protocol.
•
The IP controller must support Visca Over IP control protocol. For how to configure Visca Over IP setting on the
PTZ controller, please refer to the controller user guide
•
Within Dante Controller configuration, there is no specific Visca Over IP Config Tab for configuration.
o
Once the PTZ controller has Visca Over IP properly configured, it will automatically recognize the PTZ
camera and pass control to the camera via the Dante AV network.
The communication specifications of VISCA over IP are followings:
•
Interface: RJ-45 100/1000M
•
Interface protocol: IPv4
•
Transport protocol: UDP
•
IP address: DHCP by default (Specific by camera maker)
•
Port: 52381 by default (Specific by camera/controller maker, refer to camera/controller user guide)
VISCA over IP Network Configuration
The default IP configuration of the camera:
•
IP Address: By default, the device is set to DHCP. IP addresses are assigned via DHCP
•
Or automatically self-assigned. Self-assigned addresses on the primary interface will be in the 169.254.*.*
range.
