40
Configure Visca over IP
When all Visca-Over-IP cameras in the system are from the same brand, use the following Visca-Over-IP configuration
for the controller. The Visca-Over-IP configuration data will be applied to all Visca-Over-IP cameras in the system.
Payload Header:
•
A set of data carried with Visca-Over-IP
protocol for camera compatibility identification.
Some Visca-Over-IP cameras don’t have it.
•
The camera maker that has Payload Header:
SONY, BOLIN. For the cameras from these
brands, Set it ON
•
For the cameras from other makers, Set it OFF.
Or consult the camera provider.
Port: The control port for Visca over IP.
•
By default, is 52381.
•
Camera brands SONY, BOLIN uses port
52381.
•
Please consult your camera provider for port
information.
Adding a Visca-Over-IP Camera to Keyboard
Within the controller Setup menu, go to CAM SETTING
Use this for adding Visca-Over-IP camera manually from Local Area Network (LAN)
Selecting VISCAIP (VISCA over IP) as the protocol and clicking the P/T Speed dial will cause the VISCAIP
configuration menu to appear
•
Rotate the P/T Speed dial to move
the cursor between the IP address
octets. Move the cursor to each octet
and use the alphanumeric keypad to
enter its value. Rotate the P/T Speed
dial to move to the next octet and
repeat until all IP address octets are
set to the desired values.
•
Click the Zoom Speed dial to save
Payload Header: A set of data carried with Visca-Over-IP protocol for camera compatibility identification. Some
cameras don’t have it.
•
Camera brands that have the Payload Header: SONY, BOLIN camera. Set it ON.
•
For the cameras from other brands, Set it OFF. Or consult the camera provider.
Port: The control port for Visca over IP.
•
By default, is 52381.
•
BOLIN uses port 52381.
•
Please consult your camera provider for port information.
•
Exit this menu
Repeat this process for each camera that you wish to control with the KBD-1010-RNV keyboard.
Scanning Dante AV network for available VISCA over IP cameras
•
Press the Search button to bring up the Auto Search menu
•
Move the cursor to VISCA-IP
•
Select Yes to start the search
•
A list of discovered cameras will appear showing the cameras that have been discovered. Scroll through the
discovered cameras using the Zoom Speed dial
•
To add a camera to be controlled by the KBD-1010-RNV, press the ADD button
IP CONFIGURATION
BUTTON LIGHT
ASSIGNED KEY: F1
FACTORY DEFAULT
GPI I/O
PASSWORD SETTING
JOYSTICK ZOOM: ON
MODEL INFO
>VISCA IP SETTING
CONTROL MODE
Exit
Keyboard Setting Menu
>Payload Header: ON
Port: 52381
Exit
Model Info Menu
CAM003
Title: -
>Protocol: VISCAIP
Exit
Camera Setting Menu
>IP Address:
192.168. 1. 100
Payload Header: ON
Port: 52381
Exit
VISCAIP Configuration Menu
