22
A reboot is required after clearing the configuration for the changes to take effect. Some devices will
allow you to automatically reboot after clearing the configuration. If this option is not available, a
manual reboot is required.
Plugins
Some devices may present additional 'plugin' tabs, defined by the device manufacturer, for configuration
and display of additional device settings, such as video configuration and/or ancillary channel settings.
The contents of these tabs will vary based on the controls and information that the device manufacturer
has chosen to expose.
Video Config Tab
Video Config Tab is an additional 'plugin' tabs defined by Bolin, for the camera and decoder, with additional video
device settings.
Following Video Config information is based on the Dante Control software version 4.4.2.96 or above
Video Config Tab with Bolin Dante AV camera
Video Reference Settings
1.
Video Resolution: Set the video resolution of your
DanteAV device
2.
Color Space: Set the color space of your DanteAV
device
•
User can select YUV444/422/420 or RGB format
in 2160p resolution or YUV 422 or RGB format
in 1080p and 720p resolution
3.
Bit Depth: Set the bit depth of your DanteAV device
from 8 or 10 bit color range
HDCP Settings
1.
HDCP Version:
•
Auto: Unsure of how functionality of this works
•
HDCP 1.x: Enables HDCP on the HDMI output
of your DanteAV device
•
No HDCP: Disables HDCP on the HDMI output
of your DanteAV device
Compression Settings:
1.
Compression Profile:
•
Broadcast mode: Favors quality of image over
latency
•
Ultra Low Latency mode: Favors keeping latency
at the minimum over quality of image
2.
Video Stream Bandwidth Cap:
•
This function will allow you to set a maximum
bandwidth cap of your DanteAV device.
•
Please consult with the
bandwidth table for further details.