8. User Logs in & Logs out
Keyboard password function is for safety purpose. The func-
tion only allows for authorized peo ple to enter the sy stem
with a preset passwo rd. The factory de fault passwo rd is
(000000), that is, no password setting.The system can include
8 different users with individual passwords.
The newly purchased system or the reset system has no pass-
word (the default password 000000 means no password has
been set), thus the user can enter the system directly.
System master sets users' passwords: enter the system menu
thro ugh key bo ard #1, set passwords o f all the users in
advance. After determining the priority leve l of each user,
system master should give passwords to each user based on
his priority level. User must register before entering the system
(refer to 9.1 System Setup for password setting operation).
If necessary system master can clear users' password.( refer
to 9.1 System Setup for password clearance operation)
User registers with the system: after the keyboard is powered
up, the LCD displays "SYSTEM PASSWORD". input the password
given by the system master to enter the system.
User changes password: press"SHIFT-OPEN" keysand change
the password as per the instructions on the LCD (system mas-
ter cannot change but can clear the new passwords set by
users).
User logs out: press "SHIFT CLOSE" keys to log out the system.
The LCD displays "SYSTEM PASSWORD" If reentering the system,
user must input the password.
N O T E: T he c au se s o f n o n- su c c e s sf ul p as sw o r d
c hanging:
1)
Input old password is not correct;
2)
Confirm ed new passw ord is no t the sam e w ith the new
password;
3)
New password inc ludes non- digital character (c harac ter
other than 0-9);
4)
New password is the same with the old password.
