Böcker AHK 30/1400 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 200

Böcker AHK 30/1400 Скачать руководство пользователя страница 59

Trailer Crane AHK 30/1400

Transport

02/2008

59

Only for models with ball coupling:

NOTE!

See the supplier documentation for the operating instructions for the height-adjustable
drawbar.

1.

Attach the trailer to the towing vehicle.

2.

Push the lever (1) down to the stop.

Abb. 58: Coupling

WARNING! Danger to life!

Disconnection of the machine from the towing vehicle might result in serious
injury to persons or damage to property! If the wear indicator does not show a
"+" sign, even if the machine is properly attached to the coupling, the ball
receptacle or the ball coupling of the towing vehicles is worn.

–

Before transporting the machine, ensure that all parts are properly mounted.

–

If the wear indicator does

not

show a "

+

" sign, do not use the machine and have

it repaired without delay.

3.

The wear indicator (arrow) must show a
"+" sign.

4.

If the wear indicator shows a "x" sign,
detach and reattach the machine. If the
wear indicator still shows "x" sign, do
not use the machine and have it
repaired without delay.

5.

If the wear indicator shows a "-" sign,
the ball receptacle or the ball coupling
of the towing vehicles is worn. Do not
use the vehicle or machine and repair
the defective devices without delay.

Abb. 59: Wear indicator

«
...
57
58
59
60
61
...
»

Содержание AHK 30/1400









































































































































































































Отзывы:

Нет отзывов