Boca 112k DynamicDuo, Справочник по аппаратуре

Страница: 44 / 64

44 44
44 44 44
Boca 112K DynamicDuo Modem Boca 112K DynamicDuo Modem
Boca 112K DynamicDuo Modem Boca 112K DynamicDuo Modem Boca 112K DynamicDuo Modem
A A
A A
AT+MS Command (Modula T+MS Command (Modula
T+MS Command (Modula T+MS Command (Modula
T+MS Command (Modulation Select) tion Select)
tion Select) tion Select)
tion Select)
This extended-format command selects the modulation and,
optionally, enables or disables automode, specifies the lowest and
highest connection rates, selects m-Law or A-Law codec type, and
enables or disables robbed bit signaling generation (server
modem) or detection (client modem) using one to five
subparameters. The command format is:
56K: 56K: 56K: 56K: 56K:
+MS=<mod>[,[<automode>][,[<min_rate>][,[<max_rate>][,[<x_law>]
[,[<rb_signal>][,[Maxup_rate>]]]]]]<CR>
33.6: 33.6:
33.6: 33.6:
33.6:
+MS=<mod>[,[<automode>][,[<min_rate>][,[<max_rate>]
Notes:
1. For 14400 bps and lower speeds, the Nn command and S37 register can
alternatively be used, in which case the +MS subparameters will modified to
reflect the Nn and S37=x settings. Use of the Nn and S37=x commands is not
recommended but is provided for compatibility with existing communication
software. (S37 is not updated by the +MS command.)
2. Subparameters not entered (enter a comma only or <CR> to skip the last
subparameter) remain at their current values.
Reporting Selected Options
The modem can send a string of information to the DTE consisting of selected options using
the following command:
+MS?
The response is:
+MS: <mod>,<automode>,<min_rate>,<max_rate>,<x_law>,<rb_signaling>
9346.p65 11/20/97, 9:34 AM 44