Boca 112k DynamicDuo, Справочник по аппаратуре

Страница: 40 / 64

40 40
40 40 40
Boca 112K DynamicDuo Modem Boca 112K DynamicDuo Modem
Boca 112K DynamicDuo Modem Boca 112K DynamicDuo Modem Boca 112K DynamicDuo Modem
S-Reg S-Reg
S-Reg S-Reg
S-Register ister
ister ister
isters ss
ss
This section defines the purpose of the modem registers, and sequentially
lists the registers and describes their functions. These registers affect
various operating characteristics and allow you to obtain information
about the modem, as well as test the modem. Each register has a factory-
set value, which you can read or change to fit your needs.
Reading a Reg Reading a Reg Reading a Reg Reading a Reg Reading a Register ister ister ister ister V V V V Value alue alue alue alue
To read the current value of a register, type:
AT Sn? [ENTER],
where n is a register number.
AT Sn? Sn? [ENTER] from the command mode.
To read the register values of S0 and S1, type
AT S0? S1? [ENTER].
The modem will display the first register value, a carriage return, the
next register value, a carriage return, and OK or 0.
Chang Chang
Chang Chang Changing a Reg
ing a Reg
ing a Reg ing a Reg ing a Register
ister
ister ister ister V
V
V V Value
alue
alue alue alue
To change a register value, use the Sn command (ATSn=v), where n is a
register number and v is the new value you want to assign to the register.
Type:
AT S0=3 [ENTER]
to have the modem automatically answer on the third ring.
The table on the following page lists the modem’s registers and their
functions.
9346.p65 11/20/97, 9:34 AM 40