Boca 112k DynamicDuo, Справочник по аппаратуре

Страница: 10 / 64

10 10
10 10 10
Boca 112K DynamicDuo Modem Boca 112K DynamicDuo Modem
Boca 112K DynamicDuo Modem Boca 112K DynamicDuo Modem Boca 112K DynamicDuo Modem
Section Section
Section Section
Section TTTTTw w
w w
wo: Installa o: Installa
o: Installa o: Installa
o: Installation tion
tion tion
tion
This section explains how to install the Boca 112K DynamicDuo
Modem in your computer. Review the contents of your package
to make all items are present. If any items are missing or
If any items are missing or If any items are missing or If any items are missing or If any items are missing or
damaged, contact the dealer from whom you purchased the damaged, contact the dealer from whom you purchased the
damaged, contact the dealer from whom you purchased the damaged, contact the dealer from whom you purchased the damaged, contact the dealer from whom you purchased the
modem for assistance. Also note that phone cable configuration
modem for assistance. Also note that phone cable configuration modem for assistance. Also note that phone cable configuration modem for assistance. Also note that phone cable configuration modem for assistance. Also note that phone cable configuration
will vary for international settings.
will vary for international settings.
will vary for international settings. will vary for international settings.
will vary for international settings.
2.1 Installing the Modem 2.1 Installing the Modem
2.1 Installing the Modem 2.1 Installing the Modem
2.1 Installing the Modem
NOTE: If your computer came with an internal modem, you must
physically remove it or disable it through your computer’s BIOS setup.
Consult your computer’s manual or manufacturer for specific
instructions.
1. Turn off your computer and disconnect any attached devices
and power cords. Remove any diskettes.
2. Remove the computer’s cover and locate an available 16-bit
expansion slot. Remove that expansion slot cover and save the
screw.
3. Remove the modem from its anti-static bag,
handling it by its edges and retaining bracket.
Be careful not to touch the edge connector or
any components on the card.
4. Carefully insert the modem into the
expansion slot you selected, applying
pressure to the upper board edge until it is
seated in the slot.
9346.p65 11/20/97, 9:33 AM 10