Boca 112k DynamicDuo, Справочник по аппаратуре

Страница: 37 / 64

37 37
37 37
37
Modem Command Reference Modem Command Reference
Modem Command Reference Modem Command Reference Modem Command Reference
MNP Opera MNP Opera
MNP Opera MNP Opera
MNP Operation tion
tion tion
tion
The modem supports all of the preceding classes. The following AT
Commands apply to the MNP protocol. Default values are highlighted.
Break Control
Determines the modem response when a BREAK is received from the
DTE or the remote modem. The values of the parameters vary based on
the three following conditions:
(1) When a break is received from the DTE during NORMAL or MNP
mode:
AT\K0, 2, 4: modem enters command mode without sending a break to
the remote modem.
AT\K1: modem clears the terminal and modem buffers and sends a
break to the remote modem.
AT\K3: modem does not clear the buffers, but sends a break to the
remote modem.
A A A A AT\K5: T\K5: T\K5: T\K5: T\K5: modem sends a break to the remote modem in sequence modem sends a break to the remote modem in sequence modem sends a break to the remote modem in sequence modem sends a break to the remote modem in sequence modem sends a break to the remote modem in sequence
with any transmitted data. (default).
with any transmitted data. (default). with any transmitted data. (default). with any transmitted data. (default). with any transmitted data. (default).
(2) When a break is received from the remote modem during NORMAL
mode:
AT\K0, 1: modem clears the terminal and modem buffers and sends a
break to the local DTE.
AT\K2, 3: modem does not clear the buffers but sends a break to the
local DTE.
A A
A A
AT\K4, 5: T\K4, 5:
T\K4, 5: T\K4, 5:
T\K4, 5: modem sends a break in sequence with any data being modem sends a break in sequence with any data being
modem sends a break in sequence with any data being modem sends a break in sequence with any data being
modem sends a break in sequence with any data being
buf
buf
buf buf buffered. (default)
fered. (default)
fered. (default) fered. (default) fered. (default)
(3) When a break is received from the DTE during DIRECT MODE mode:
AT\K0,1,3: modem sends a break to the remote modem and enters
command mode.
A A
A A
AT\K2, 4, 5: T\K2, 4, 5:
T\K2, 4, 5: T\K2, 4, 5:
T\K2, 4, 5: modem sends a break to the remote modem. (default) modem sends a break to the remote modem. (default)
modem sends a break to the remote modem. (default) modem sends a break to the remote modem. (default)
modem sends a break to the remote modem. (default)
9346.p65 11/20/97, 9:34 AM 37