Boca 112k DynamicDuo, Справочник по аппаратуре

Страница: 11 / 64

11 11
11 11
11
5. Secure the modem into place by aligning its metal retaining
bracket with the hole in the top edge of the system’s rear panel.
Fasten the modem’s metal bracket with the screw removed
from step 2.
6. Disconnect your present phone cord(s) from the wall jack(s).
Plug the end of the phone cord that came with the modem into
the wall jack, and the other end into the jack with the symbol
( ) on the back of the modem. Plug the phone into the jack
with the symbol ( ) on the back of the modem.
NOTE: for both on-board modems to work, you must have one of
the following:
• An RJ-14 wall jack which is wired for two telephone lines
(independent numbers), as shown here:
Installation Installation
Installation Installation Installation
LINE 1 LINE 2
9346.p65 11/20/97, 9:33 AM 11