BMW X3 2021, Руководство пользователя

Страница: 19 / 104

Default settings
The route preference can be individually ad‐
justed. The settings are stored as standard and
automatically applied to new destination guidan‐
ces.
Additional information:
Setting route preference, refer to page
30 .
Route preview
Principle
When destination guidance is activated, an over‐
view of the route sections can be displayed.
General information
The following information is displayed:
▷ Display of route guidance information, such
as turn information or lane information.
▷ Traffic events and traffic flow.
▷ Points of interest along the route. Points of
interest can be selected and transferred di‐
rectly to the destination guidance.
▷ Possible stops along the route, such as refu‐
eling or charging station recommendations.
▷ Display of information along the route, such
as for dangerous curves.
Display route preview
1. Press the button on the Controller.
2. Tilt the Controller to the right.
3. "Route preview"
Route magnet
Principle
With active destination guidance, the route dis‐
played on the map can be adjusted manually. To
do this, use a marker point, the so-called route
magnet, to pull the route into the desired direc‐
tion.
General information
As an alternative, the route magnet can be used
via the touchscreen.
When destination guidance is active, the route
magnet can also be accessed via the pop-up on
the map.
Additional information:
Destination guidance, refer to page
17 .
Open route magnet
1. Press the button on the Controller.
2. Tilt the Controller to the right.
3. "Route preview"
4. Tilt the Controller to the right.
5. "Add route magnet"
Setting a route magnet
1. Press the button on the Controller.
2. Press the Controller.
3. "Interactive map"
4. Use the cross-hairs to select the route sec‐
tion for which the route magnet must be set.
▷ To change the scale: turn the Controller.
▷ To shift the map: tilt the Controller in the
required direction.
▷ To shift the map diagonally: tilt the Con‐
troller in the required direction and turn it.
5. Press the Controller.
6. "Add route magnet"
Editing a route magnet
1. If necessary, tilt the Controller to select the
route section in which the route magnet must
be processed.
2. Press the Controller.
3. Select the desired setting.
Seite 19
Map
NAVIGATION
19
Online Edition for Part no. 01405A39127 - VI/21