BMW 318D, Руководство пользователя

Страница: 76 / 430

tection that can be used to activate the driver
profile.
Non-ConnectedDrive countries: If PIN protection
has not been set up or the PIN is not known, the
driver profile cannot be activated.
ConnectedDrive countries: If PIN protection has
not been set up or the PIN is not known, the
driver profile can be activated with the login de‐
tails for the relevant ConnectedDrive account.
Via iDrive:
1. "CAR"
2. "Driver profiles"
3. Tilt the Controller to the right.
As an alternative to steps 1 to 3, it is possible
to tap the profile picture in the upper status
bar.
4. "Driver recognition"
5. "using PIN"
Changing/cancelling recognition
If a different vehicle key or a different digital key
needs to be assigned to a driver profile, the cur‐
rent assignment must be cancelled first.
Via iDrive:
1. "CAR"
2. "Driver profiles"
3. Tilt the Controller to the right.
As an alternative to steps 1 to 3, it is possible
to tap the profile picture in the upper status
bar.
4. "Driver recognition"
5. "with vehicle key"
or
"With Digital Key"
6. "Activate linkage"
If the vehicle and the vehicle key are to be
handed over for a service, for example, the
following steps should be carried out first:
▷ Set up PIN protection.
▷ Cancel recognition via the vehicle key.
▷ Switch to the guest profile.
This means the vehicle key that is handed over
can no longer be used to access the personal
driver profile.
Selecting a driver profile
The driver profile is selected automatically based
on the recognition of the key/remote control.
If the guest profile is active, the driver profile is
selected on the welcome screen or via iDrive: A
PIN may need to be entered.
1. "CAR"
2. "Driver profiles"
As an alternative to steps 1 and 2, it is possi‐
ble to tap the profile picture in the upper sta‐
tus bar.
3. Select a driver profile.
4. "OK"
The settings saved in the selected driver profile
are applied automatically.
Switching synchronisation with
the ConnectedDrive account
on/off
ConnectedDrive countries:
The settings saved in the driver profile are
synchronised with the personal ConnectedDrive
account. This makes it possible to use the per‐
sonal settings in other BMW vehicles with Con‐
nectedDrive access as well, provided that this
function is supported.
Synchronisation with the ConnectedDrive ac‐
count is enabled when a driver profile is created
or via iDrive:
1. "CAR"
2. "Driver profiles"
3. Tilt the Controller to the right.
Seite 76
CONTROLS
Personal settings
76
Online Edition for Part no. xxx - VI/19