BMW 318D, Руководство пользователя

Страница: 293 / 430

ating. Switch off the auxiliary heating before re‐
fuelling.
Operating requirements
▷ Vehicle is in rest or standby state and not in
drive-ready state.
▷ Battery must be sufficiently charged.
When activated, the independent ventilation/
auxiliary heating uses power from the vehicle
battery. As a result, the maximum activation
time is restricted to protect the battery. After
the engine is started or after driving a short
distance, the system will be available again.
▷ Auxiliary heating: sufficient fuel in the tank.
If the fuel level is low and the vehicle is
parked on a slant, the function of the auxiliary
heating may be limited.
▷ Ensure that the date and time are set cor‐
rectly in the vehicle.
▷ Open the vents to allow the air to enter the
passenger compartment.
Calling up the air conditioning
menu
Press the button.
The climate comfort menu is displayed.
Individual settings can be performed for certain
air conditioning functions.
Switching on/off directly
General
The system can be switched on or off in various
ways.
The system switches off automatically after a
certain length of time. It continues to run for a
short time after it has been switched off.
Using the button
General
If the vehicle is in standby state, the independent
ventilation can be switched on or off via the but‐
tons of the automatic air conditioning.
Switching on
Press any button, except:
▷ Rear window heating.
▷ Lower side of air flow button.
▷ Seat heating.
▷ Menu.
Switching off
Press and hold the down button.
The system switches off after leaving and lock‐
ing the vehicle.
Via iDrive
1. "CAR"
2. "Settings"
3. "Climate comfort"
4. "Auxiliary heating/ventilation"
5. "Start now"
Using BMW display key
Switching on
1. Switch on the display of the BMW Display
key.
2. "Precondit. setting"
3. Tap the symbol or the symbol.
4. "Activate now"
5. "Start"
Seite 293
Air conditioning
CONTROLS
293
Online Edition for Part no. xxx - VI/19