SECTION
3
VACUUM SYSTEM
See figures
3-2 and 5-20
.
The vacuum flow is
initiated by the vacuum
pump, or
blower. An air
and water mixture is drawn into the vacuum inlet
on the waste recovery tank.. The air exits the waste
tank through a 100 mesh filtration system, into the
vacuum pump. A vacuum pump relief valve is
installed for vacuum pump protection.
The air is discharged from the vacuum pump
through a spiral silencer and then through an
engine exhaust silencer.
A level shut off sensor is located near the top of
the waste recovery tank and will shut down the
unit before the tank is at full capacity. This protects
the vacuum pump from water damage.
Note:
Waste tank level shut off will not shut the
unit off if debris prevents proper operation. Check
switch after each job to ensure proper operation.
3-2
BLUELINE HAZINATOR
®
10
Содержание HAZINATOR
Страница 5: ......
Страница 47: ...SECTION 5 DECALS WARNING DECAL CONTROL BLUELINE HAZINATOR 42 ...