BlueLine HAZINATOR Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 48

background image

LIMITED WARRANTY

BLUELINE

warrants your machine to be free of defects in material and workmanship. This

warranty shall extend to the designated parts for the specific period of time listed from the date
of delivery to the user. If

BLUELINE

receives notice of any defects during the warranty period,

BLUELINE

will either, at its option, repair or replace products that prove to be defective. Any

transportation, related service labor, normal maintenance and diagnostic calls are not included.

Gasoline Engine (Through manufacturer or local dealer)______ 1 year
Vacuum Pump (Through manufacturer or local dealer)_______ 18 months
Optional Waste Pump_________________________________ 1 year
Waste and Water Tanks________________________________ 1 year
Pressure Regulator____________________________________ 1 year
Battery (pro-rated) ____________________________________1 year
All Other Components_________________________________ 1 year

This warranty shall not apply to defects caused by improper installation or operation, inadequate
maintenance by the customer, unauthorized modification or misuse, improper repair, freezing or
damage due to hard water scaling.

Electrical components, disposable filters, belts, hoses, fittings, o-rings and other service
maintenance items are not under warranty. Components supplied by

BLUELINE

, but provided

by other manufacturers, will only be warranted to the extent that they are warranted to

BLUELINE

.

To receive warranty service, products must be returned to a

BLUELINE

designated service

facility. The customer shall prepay shipping charges for products returned to

BLUELINE

for

warranty evaluation and

BLUELINE

shall pay for the return of products to the customer.

BLUELINE

makes no other warranty, expressed or implied, with respect to this product.

BLUELINE

disclaims the implied warranties of merchantability and fitness for a particular

purpose. Any implied warranty of merchantability or fitness is limited to the specific duration of
this limited warranty.

This warranty gives the customer specific legal rights, and you may also have other rights that
may vary from state to state, or province to province.

The remedies provided herein are the customer’s sole and exclusive remedies. In no event shall

BLUELINE

be liable for any direct, indirect, special, incidental, or consequential damages,

whether based on contract, tort, or any other legal theory.

BLUE

LINE

HAZINATOR

II

«
1
2
3
4
5
...
»

Содержание HAZINATOR

















































Отзывы:

Нет отзывов

Похожие инструкции для HAZINATOR

Бренд: Olympus Страницы: 86

Бренд: Omnia Страницы: 8

Ettan IPGphor 3

Бренд: GE Страницы: 64

Бренд: GE Страницы: 56

Бренд: GE Страницы: 132

Бренд: GE Страницы: 16

Бренд: GE Страницы: 474

Movie FL Black E27 Flaps

Бренд: Qazqa Страницы: 2

Бренд: Tascam Страницы: 80

Бренд: Tascam Страницы: 2

Бренд: Walker Страницы: 24

Бренд: Daga Страницы: 24

Бренд: DAF Страницы: 68

Бренд: T-Rex Страницы: 13

Бренд: Federal Signal Corporation Страницы: 12

Бренд: Oakworks Medical Страницы: 28

Бренд: WalkMed Страницы: 2

Бренд: Walinga Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды