Blue Coat SG810 series, Руководство по установке

Страница: 46 / 110

P/N 231-02941 SG810 Installation Guide page 46
11
The SG810 is configured, and Page 5 displays. This page explains how to
access the SG810 from an SSH Client or with a Web browser. See
Section E:
“Logging in to the SG810 on page 53 for more information.
Figure 2-9: Setup Console—Page Five
--------------------
-- (page 5 of 5) ---------------------
DIRECTIONS:
The SG Appliance has been successfully configured to use IP
address: "10.0.1.246"
You can connect to the command line interface or Web
interface to perform additional management tasks.
To connect to the command line interface, open the following
location from your SSH application: 10.0.1.246
To connect to the Web management interface, go to the
following location with your web browser:
https://10.0.1.246:8082/
-------------- CONFIGURATION COMPLETE------------------
Press "enter" three times to activate the serial console
Executing image: Version: SGOS 5.2.1.9, Release id: 30429
Debug
Interface 0:0: MAC address 00:00:00:00:00:00, no link
Interface 0:1: MAC address 00:00:00:00:00:00, full duplex,
100 megabits/sec
Management Console started