background image

Appendix B: Regulatory Statements

 55

Appendix B: Regulatory Statements

Any modification to this product, unless expressly approved by Blue Coat Systems, Inc., could void the 
user’s authority to operate the equipment.

Class A Digital Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant 
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy, and if not installed and used in accordance with the 
instruction manual, might cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference, in which case the users are required 
to correct the interference at their own expense.

EC Community EMC Warning

This is a Class A product. In a domestic environment, this product might cause radio interference in which 
case the user might be required to take adequate measures.

Canadian EC EMC Warning

This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la class A est 
conforme a la norme NMB-003 du Canada.

Australia/New Zealand EMC Warning

This is a Class A product. In a domestic environment, this product might cause radio interference, in 
which case the user might be required to take adequate measures.

Содержание SG200 200 A





























































Отзывы: