Blue Coat SG200 200 A, Руководство по установке

Страница: 15 / 60

Chapter 2: First-Time Configuration 15
5
Enter the network parameters for your appliance.
Figure 2-3: Initial Configuration Page—Network Parameters
6
Enter the Console Account username and password and the Enable (privileged mode) password. Do
not select
Password is in hashed format
unless the password is already in a valid hashed format.
Figure 2-4: Initial Configuration Page—Console Account Username and Password
7
Select the default policy for proxied services:
• Selecting
Allow
permits all proxied transactions to pass through the SG200; you must then create
policies to explicitly deny proxied transactions on a case-by-case basis.
Note: If you want to have the password hashed for you, use the remote initial configuration
method (see
Section D:Configuring the SG200 from a Remote Location on page 32).