Blue Coat SG200 200 A, Руководство по установке

Страница: 8 / 60

8 Blue Coat SG200 Series
Installing the SG200
There are three methods of installing the SG200 Appliance—placing it on a shelf or tabletop, mounting it
on a wall, or mounting it in an equipment rack.
Placing the SG200 on a Shelf or Tabletop
For shelf or tabletop use, affix the four skid-proof rubber pads to the underside of the SG200.
Mounting the SG200 on a Wall
To mount the SG200 vertically on a wall, use the wall-mounting bracket, anchors, and screws; you also
need a drill and a Phillips screwdriver.
1
Use the holes on the wall-mounting bracket to mark the positions on the wall for the two anchors; drill
holes in the wall just large enough to fit each anchor.
2
Line up the holes on the wall-mounting bracket with the anchors. Use a Phillips screwdriver to secure
the bracket to the wall using the wall-mount screws.
Figure 1-3: Secure the Wall-Mount Bracket to the Wall
3
Locate the two notches on the underside of the SG200, near the front; an arrow on each side of the
SG200 points to each notch.
4
Mount the SG200 on the wall-mount bracket by inserting the notches on the SG200 into the hooks on
the bracket and pushing down slightly to lock the appliance into place.
Figure 1-4: Secure the Wall-Mount Bracket to the Wall
4 Insert the two notches
into the wall hooks
3 Locate the two notches