Blue Coat SG200 200 A, Руководство по установке

Страница: 14 / 60

14 Blue Coat SG200 Series
200 A and 200 B—Initial Configuration with a Web Browser
Important: To configure your SG200 using a browser, the following conditions must be true:
• The browser must support Javascript and Javascript must be enabled.
• The browser must not be proxied. For information about proxied browsers, see The
Initial Configuration Page is Not Accessible on page 42.
• Your proxy must not already be configured.
To Configure the SG200 200 A and 200 B Using a Web Browser:
Note: The following procedure is for 200 A and 200 B Appliances running SGOS 4.x or later.
1
Complete the procedure described in “Connecting the SG200 to a PC” on page 12.
2
Power on the SG200.
3
Enter the following URL into your browser:
proxysg.bluecoat.com:8083/
A security warning dialog appears.
4
Click
Yes
(or
OK
) in the dialog. The SG200 Initial Configuration window opens.
Note: It is safe to click Yes or OK in this dialog because the SG200 system is directly
connected to your PC. For more information about this warning dialog, see A Security
Warning Appears for the Initial Configuration Web Page on page 46.
The appearance of the dialog varies depending on the browser that you use.
Important: If you do not see the warning dialog or if you cannot connect to the Initial
Configuration page, reset the SG200 to its factory defaults. See
Resetting the SG200
to Its Factory Defaults on page 46.