Blue Bird M380 2003, Руководство пользователя

Страница: 515 / 579

M380 Owner’s Manual____________________________________________________Service Procedures - Chassis – 6-2
Rev. “F” 6-2-1
6-2 Chassis_______________
_____________________________
6-2.1 Lubrication Points
NOTE: There are also two universal joints on drive shaft to include in Lubrication Points.
6-2.2 Tire/Wheel Change Procedure
The wheel/tire assemblies used on your motor home are heavy-duty truck-type. They are heavy and
may be difficult to handle. If at all possible, changes should be accomplished by a service station
equipped to handle truck equipment. However, if a situation arises where no service facilities are
available, the following procedures may be used.
CAUTION: Severe injury or death may result. DO NOT use the leveling system for changing
tires or working under the vehicle. Keep the rear wheels in firm contact with the ground with
the parking brake set. With the leveling jacks extended, there is a possibility the vehicle may
move either toward the front or the rear.
NOTE: Jack and lug wrench are not furnished with your motor home. An outside drive axle
wheel may be used to replace front or rear wheel until permanent replacement can be made.
Road speed must not exceed 40 mph.
6-2.2.1 Front Axle Wheels
1. Drive motor home out of traffic lane onto a level service capable of supporting jack.
2. Turn on hazard flasher and apply parking brakes before leaving motor home.
3. Turn off ignition and set transmission selector to Neutral (N) position.
4. Remove white plastic wheel saver from road side rear luggage compartment.
5. Place wheel chocks against front and rear of tires on opposite side.
6. Place jack under axle and raise slightly until securely in place.
CAUTION: Bumpers are not designed for lifting and/or towing of the vehicle.