Blue Bird M380 2003, Руководство пользователя

Страница: 166 / 579

4-8 – Interior and Exterior Systems Operation – Awning Operation__________________________M380 Owner’s Manual
4-8-2 Rev. “F”
3. Release the rafter arm by pulling outward on the cap of
the ratchet stud located on the upper portion of the arm
(
Fig. 4 ). Extend the arm and place the claw over the
shaft of the roller.
4. Set the spring tension of the rafter arm by grasping the
outer tube and pushing briskly forward in the direction of
the arrow as shown in
Fig. 5 until a click is heard indicating
the arm is locked. At this point the awning fabric will be
taut.
NOTE: Leave Z-Lock open when awning is open to avoid
damage.
5. Raise the awning to the desired height by
releasing the snap stud on the main arm and
pushing up and outward on the roller assembly
(
Fig. 6 ).
REPEAT STEPS 3-6 FOR THE OTHER END OF THE
AWNING.
Partial Extension or “Caravan” Position
1. Follow
Steps 1 and 2 above.
2. Insert the pull rod in the loop of the center control
strap and unroll the awning to the desired extension
(
Fig. 7 ).
3. To prevent billowing, hook the claw of the
unextended rafter arm over the roller shaft ( Fig. 4 ).
This will require the awning be extended
approximately four and one half feet.
4. Raise the awning to the desired height by following
Step 6 above.