Blue Bird M380 2003, Руководство пользователя

Страница: 144 / 579

4-5 – Interior and Exterior Systems Operation – Inverter__________________________________M380 Owner’s Manual
4-5-4 Rev. ”F”
4-5.1.5 Status Monitoring
The RC7GS remote monitor operating conditions including: the ac supply, inverter operation, charger
operation, battery condition, generator condition (RC7GS only), Time Left to Run, and Time Left to
Charge.
4-5.1.6 Operation
Front Panel Indicators and Controls
The RC7GS front panel contains LEDs, LCD displays, and pushbuttons for viewing status and system
setup. All operating power for the remote control is provided by the inverter/charger via the supplied
cable.
Status LEDs – There are four LEDs on the front panel which light solid or flashing during operation,
indicating the system’s status. Upon initial power-up of the inverter, all LEDs will flash as the unit
goes through a self-test. After the initial power-up test completes, the LEDs will indicate the current
state of the inverter and charger. Use these LEDs along with the LCD display for detailed system
status.
Inverter LED – The green Inverter LED indicates the inverter is switched ON and ready to provide
backup power. If there is no ac power, the inverter LED will be ON solid, indicating that the
inverter/charger is in the inverter (ON) mode.
Inverter LED Other LEDs or Devices Meaning
ON (solid) Inverter ON
Flashing Charge LED (flashing) Inverter ready (charging)
Slow Flash Load Sense Searching
Flashing Error LED ON + Buzzer Inverter Error
OFF Inverter Switched OFF
Charge LED – The Charge LED indicates the current battery charge mode.
Charge LED
Other LEDs or Devices Meaning
ON (solid) Bulk Charging
Slow Flash Absorption Charging
Fast Flash Batt. Full LED ON Float Charging
Very Fast Flash Equalize Charging
OFF Inverter Mode (no charging)
Batt. Full LED – The Batt. Full LED indicates the state of charge on the batteries. This LED will not
illuminate until the batteries have charged up to at least 90%. The duriation of the LED’s ON time will
increase until the batteries reach 100%, which at that time, the LED will be ON solid. In the inverter
mode, the OFF time duration of the LED will increase until the batteries discharge to below 90% at
which time the LED will extinguish.
Batt. Full LED Other LEDs or Devices Meaning
Solid Battery Fully Charged (100%)
Flashing Battery Charged 90% or higher
OFF Battery Below 90% Charge
Error LED – The Error LED indicates that there is a problem with the inverter/charger or batteries.
Check the LCD display to find and correct the nature of the problem.
Error Other LEDs or Devices Meaning
ON (solid) Check System