Blue Bird M380 2003, Руководство пользователя

Страница: 46 / 579

1-1 - Safety and Security - Security Features____________________________________________M380 Owner’s Manual
1-2-14 Rev. “F”
To Silently Disarm the System: First press and release the small middle button, then press and
release the small middle button again. The parking lights will flash once to confirm disarming. The
doors will unlock.
Upon Disarming:
•
The siren will chirp once (or three times if an alarm activation occurred) unless the silent
disarming procedure is followed.
•
The parking and interior lights will flash once (then, if programmed, illuminate for 30 seconds
or until the vehicle’s ignition is turned on).
•
The doors will unlock, either all doors or driver’s door only.
•
The starter interrupt will disengage.
•
The Status Indicator Light will show one of these features or conditions:
- Flashing rapidly = Automatic Rearming feature is in progress.
- Off = System disarmed (Automatic Rearming feature not selected).
- Flash/Pause = Indicates violated zone if system has been activated.
*The doorlock interface, in either standard form or driver’s door priority form, must be installed.
Safety Disarm Feature:
Pressing and releasing the large upper button while the system is activated into the alarm condition
will disarm the system, but the doors will remain locked. This is the “Safety Disarm” feature, which
allows the vehicle to remain secure, even though an activated system has been disarmed.
Safety disarm will also cancel Automatic Rearming. This feature is also very useful when the vehicle
is exposed to environmental conditions, such as storms, trains or heavy vehicles, which may cause
false activations.
Safety Disarm is a temporary “one time” operation, which occurs only while the system is activated.
To remotely unlock the doors after a Safety Disarm, simply arm, then disarm the system again.
Activation Alert:
If the system experiences an alarm condition and resets itself, upon disarming the siren will chirp
three times and the parking lights will flash three times instead of the normal one chirp and one light
flash. Additionally, the Status Indicator Light will be flashing a “Zone Violation Code”, when the alarm
condition activation occurred, the Status Indicator Light changes from flashing slowly to flashing two
to four times between pausing to indicate which protected zone was violated.
•
The Zone Violation code will continue to be displayed until the vehicle’s ignition is turned on.
•
The Status Indicator Light will display the Zone Violation Code in place of fast flashes
indicating Automatic Rearming.
•
Should the system be rearmed before the ignition clears the Zone Violation Code memory,
the Status Indicator Light shows the normal slow flashing.
•
The system can store up to two consecutive Zone Violation Codes. If more activations
occurred, the two most recent codes are displayed.
Automatic Rearming:
Automatic Rearming is a programmable feature, which ensures that your system is never
inadvertently disarmed. It is possible to accidentally or unknowingly operate the transmitter from a
pocket or purse. You may not even be aware of an accidental disarming due to the enhanced
operating distance offered by the Extended Range Transmitter.
How it Works:
Whenever the system is disarmed by the transmitter, this feature starts a 90 second countdown,
which is indicated by a rapidly flashing Status Indicator Light. During this 90-second period, if no
protected entry points are opened and the vehicle’s ignition is NOT turned on, the system will
automatically arm itself at the end of the countdown. If desired, the system can also be programmed
to automatically relock the doors when this occurs.