Blomberg WNF 6200, Руководство пользователя, Страница: 9 / 40

9 - EN
Previous time delaying light turns off and
next time delaying light turns on after every
3 hours.
C
Laundry may be loaded/unloaded during
the time delay period.
Changing the delay time
Press the time delay button. The time changes
with steps of 3 hours each time you press
the button and the relevant time delaying light
turns on.
Canceling the time delay
Set the Time Delay to zero (all time delaying
lights are off) or turn the Program selection
knob to any program. Thus, the time delay will
be cancelled. The “End/Cancel” light flashes
continuously.
Starting the Program
1. Press "Start/Pause" button to start the
program.
2. Program follow-up lamp showing the
startup of the program will light up.
C
If no program is started or no button is
pressed within 1 minute during program
selection process, the machine will switch
to "Stand-by" mode and the illumination
level of the temperature, speed and door
indicators will decrease. Other lights and
indicators will turn off. In case of turning
the program selection knob or pressing any
button, lights and indicators will turn on.
Progress of program
Progress of a running program is shown
through the program follow-up indicator. At the
beginning of every program step, the relevant
indicator LED will light up and light of the
completed step will turn off.
You can change the auxiliary functions, speed
and temperature settings without stopping the
program flow while the program is running.
However, the change to be made must be
compatible with the program step the machine
is currently in. If the change is not compatible,
relevant lights will flash for 3 times.
C
If the machine is not spinning, the
program may be in rinse hold mode or the
automatic spin correction system has been
activated due to an excessive unbalanced
distribution of laundry in the machine.
Changing the selections after the
program has started
Switching the machine to standby mode
Press the “Start/Pause” button to switch the
machine to pause mode while a program
is running. The light of the step which the
machine is in starts flashing in the program
follow-up indicator to show that the machine
has been switched to the pause mode.
Also, when the door is ready to be opened,
"Door" light will also illuminate continuously in
addition to the program step light. If necessary
conditions to open the door are not met, the
"Door" light will remain off.
Changing the speed and temperature
settings for auxiliary functions
Auxiliary functions can be cancelled or
selected, or the spin speed and temperature
settings can be changed in accordance with
the step the program is in. If the change can
not be made, relevant light will flash for 3
times.
Adding/removing laundry in pause mode
If the "Door" light flashes while the machine is
in pause mode, it means that the conditions
(low water level, etc.) to open the door have
been met and the period of approx. 1 or 2
minutes to open the door has started. “Door”
lamp will light up continuously when the door
is unlocked. Door can be opened to load or
unload the laundry after this moment. If the
front door cannot be opened because of a
safety reason after the machine has been
switched to the pause mode by pressing
the "Start/Pause" button, the "Door" light
will continue to remain off. Nevertheless, the
follow-up light of the relevant program in which
the machine was taken to "Pause" mode will
flash.
Door lock
The loading door can be opened once the
“Door” lamp stops flashing and starts lighting
up continuously.
Child-proof lock
Protect the appliance from being tampered
by children by means of the child-proof lock.
In this case, no change can be made in the
running program.
To activate the childproof lock:
1. Press the 1
st
and 2
nd
auxiliary function
buttons for 3 sec. The lights on the auxiliary
function buttons 1 and 2 flash while you keep
the buttons pressed.
To deactivate the childproof lock:
a) Press the auxiliary function buttons 1 and 2
for 3 sec. while any program is running.
b) In addition to the above method, child-
proof lock can also be deactivated by
turning the program selection knob to
"On/Off" position and selecting another
program when no program is running.
Child-proof lock will not be deactivated in