Blomberg WNF 6200, Руководство пользователя, Страница: 8 / 40

8 - EN
Auxiliary functions
Auxiliary Function Selection Buttons
Select the required auxiliary functions before
starting the program. Furthermore, you may
also select or cancel auxiliary functions that
are suitable to the running program without
pressing the "Start/Pause" button. To select
or cancel the auxiliary functions, the machine
must be at any prior stage than the auxiliary
function to be selected or cancelled. If the
auxiliary function cannot be selected or
cancelled, light of the relevant auxiliary function
will blink 3 times to warn the user.
C
Some combinations cannot be selected
together. Ex.: Pre-wash and Quick Wash.
Warning light of the selected auxiliary
function will light up.
Auxiliary function selection
If an auxiliary function that is not compatible
with the previously selected auxiliary function
is chosen, the function selected first will
be cancelled and the last auxiliary function
selection will remain active.
Ex.: If you want to select pre-wash first and
then quick wash, pre-wash will be cancelled
and quick wash will remain active.
Auxiliary function that is not compatible
with the program cannot be selected. (see,
“Program Selection Table”)
C
Auxiliary function buttons may differ
according to the model of your machine.
• Prewash
A pre-wash is only worthwhile for heavily soiled
laundry. Without pre-wash you save energy,
water, detergent and time.
C
Pre-wash without detergent is
recommended for lace and curtains.
• Quick Wash
This function can be used for “Cottons” and
“Synthetics” programs. It decreases the
washing times for lightly soiled laundries and
also the number of rinsing steps.
C
Recommended load capacity is half of the
maximum load capacity of the selected
program.
• Rinse Plus
This function enables your machine to make
another rinsing in addition to the one already
made after the main wash. Thus, the risk
for sensitive skins (babies, allergic skins and
etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced.
• Plus water
When this function is selected, washing
and rinsing is made with plenty of water in
“Cottons”, “Synthetics”, “Delicates” and
“Woolens” programs.
C
Use this function for delicate laundries that
crease easily.
C
Whenever you select this auxiliary function,
load your machine with half of the
maximum laundry specified in the program
table.
• Anti-Creasing
With this function, drum movement will be
lessened to prevent creasing and spinning
speed is limited. In addition, washing is carried
out at a higher water level.
• Rinse Hold
If you are not going to unload your clothes
immediately after the program completes, you
may use rinse hold function and keep your
laundry in the final rinsing water in order to
prevent them become wrinkled when there is
no water in the machine. Press "Start/Pause"
button after this process if you want to drain
the water without spinning. Program resumes.
Your machine drains the water and program
completes.
If you want to spin your laundry that you left in
water:
- Adjust the spin speed.
- Press Start/Pause button
Program resumes. Your machine drains
the water, spins the laundry and program
completes.
• Soaking
In case of selecting the auxiliary function for
soaking, your laundry will be kept in detergent
water before the washing process starts.
Hence, stains that ingrained into the laundry
can be removed better.
Time delaying (in some models)
If you wish to wash your clothes at a later time,
with the time delay function you can delay the
program start up 3 hours, 6 hours or 9 hours.
Do not use liquid detergent when you set
time delay. There is the risk of staining of the
clothes.
1. Open the loading door, place the laundry
inside and fill detergent drawer.
2. Set the washing program, temperature,
spin speed and, if required, the auxiliary
functions.
3. When the time delaying button is pressed
once, a 3 hour delay is selected and the
relevant led lights. When the same button
is pressed again, 6 hours; and if pressed
once more, 9 hours delay will be selected.
If the time delaying button is pressed one
more time, time delaying function will be
cancelled (all of the time delaying lights will
be off). Set the time delay as you require.
4. Delayed operation of the selected program
is started by pressing the "Start/Pause"
button after selecting the time delay.