Installation
8
Oven Assembly
DRAIN ASSEMBLY
1. Smear the threads of the drain pipe with pipe
dope.
2. Install the drain pipe using a pipe wrench. Be
sure to align the actuator mounting bracket
with the side of the oven.
3. Hang the drain cap assembly ring over the acĆ
tuator mounting bracket. The drain cap asĆ
sembly is used to cover the drain if the drain
hose cannot be left connected.
Side of Oven
Actuator
Mounting
Bracket
Figure 6
4. Remove the screws holding the cover onto the
drain actuator.
5. Remove the hardware bag shipped inside the
drain actuator.
6. Remove the actuator tab bracket holding the
actuator arm. See Figure 7.
Figure 7
7. Loosen the two set screw holding the bracket
on the back of the drain actuator.
Figure 8
