Installation
11
Oven Assembly
MISC PARTS
Oven Vent Pan and Cover
1. Install the oven vent cover using the hardware
provided.
2. Set the oven vent drip pan under the vent on
the back of the oven.
Oven Vent
Cover
Oven Vent Drip Pan
Figure 16
Front Drip Pan
1. Install the front drip pan on the oven.
Strainer
2. Insert the strainer into the drain.
Strainer
Drip Pan
Figure 17
INSTALLING DRAIN HOSE
1. If the drain cap is connected, lift up on the two
rings to remove the cap.
2. Connect the drain hose to the oven drain. Pull
down on the rings to secure.
Figure 18
3. Run the drain hose to the center of the floor
drain. Cut the hose to length.
NOTE: Be sure the hose is no longer than
necessary. If the hose is too long, it
may be pushed into the drain causing
a vapor lock and additional service.
4. Install the pvc elbow on the end of the hose.
Figure 19
