Installation
10
Oven Assembly
15. Install the hose clamp, previously attached to
the actuator cover, around the plastic cleaning
solution hose.
Figure 13
16. Reinstall the actuator cover. Be sure the end
with the hose clamp is installed on the back of
the box.
Figure 14
CLEANING SYSTEM CONNECTION
1. Secure the hose to the cleaning fitting on the
back of the oven with the clamp provided.
NOTE: Be sure there are no kinks in the cleanĆ
ing solution hose.
WATER CONNECTION
1. Prior to connecting the oven to the water
source, be sure to run the water for two minĆ
utes to flush the line. Run long enough to verify
the water is cold, not hot.
2. Connect the water hose to the water source
and the water connection on the back of the
oven.
3. Place the emergency ball valve in the off posiĆ
tion
Water Hose
Chem Line
Emergency Drain Valve
Figure 15
