Installation
6
Oven Assembly
OVEN ASSEMBLY TO STAND
NOTE: The oven weighs approximately 350 lbs,
we recommend using either a fork truck or
genie lift to raise the oven.
1. Remove the bolts securing the oven shipping
brackets to the pallet.
2. Open the oven door. Remove the side racks
and baffle from inside the oven cavity.
3. Cut a piece of cardboard 18" (457 mm) x 26"
(660 mm) and place in the oven cavity above
the elements. This will protect the oven from
the forks of the forklift.
4. Adjust the forks on the lift to less than 16" (406
mm) apart so they will fit between the eleĆ
ments and the right side of the oven cavity.
Figure 2
5. Raise the oven to above the height of the
stand.
6. Remove the shipping brackets from the botĆ
tom of the oven. Save the bolts to use in STEP
8.
7. Position the stand below the oven. Be sure the
support arms on the stand are on the right
side when facing the front of the oven. Place
the oven flush with the front of the stand and
lower into place.
Figure 3
8. Attach the oven to the stand using the bolts reĆ
moved in STEP 6.
Figure 4
