GEAppliances JTP15, Руководство по установке

Страница: 1 / 16

Before you begin
Read these instructions carefully and completely
•
IMPORTANT
-Save these instructions for
local inspector’s use.
•
IMPORTANT
-Observe all governing
codes and ordiances.
30” Built In Wall Oven
Installation
Instructions
JTP15, JTP17, JTP18, JTP27, JTP45, JTP47, JTP56,
JT910, JT910WA, JT950AA, JT950, ZET737, ZET757
• Note to Installer- Be sure to leave these
instructions with the consumer.
• OWNER- Keep these instructions for future
reference.
• NOTE- This appliance must be properly
grounded.
Parts Included
Bottom Trim
4 screws (single)
8 screws (double)
Tools You Will Need
Pub. No. 31-10435
229C
4053P417-1
1
Materials Needed
ATTENTION: INSTALLER
All electric wall ovens must be hard wired (direct wired) into an approved
junction box. A “plug and receptacle” is not permitted on these products.
1/8” Drill Bit &
Electric or
Hand Drill
Phillips
Screwdriver
Strain Relief
Clamp
Junction
Box
Wire Nuts
36” of String
“If you have questions, call 800-GE-CARES
or visit our website at:
www.GEAppliances.com”