BLH NOBEL G4-DT, Техническое руководство

Страница: 129 / 194

G4 Multi Channel Weighing Instrument
6-23
Command register
As this register is read, the answer will always contain only zeros.
There are a number of actions that can be activated in the instrument. The value of this
register (when different from zero) will activate one of these actions, as described in
below.
When an action can not be performed for some reason (wrong state etc.) an exception
is given as reply. When an exception with code 03 or 07 is received the command error
register could be read to get a better error explanation.
Cmd Action activated in
instrument
Description
0 No action
1 Start operation When the instrument is in ‘Wait for start state’,
this command can be used to start up the
instrument.
2 Enter Remote operation This command disables the keys on the
instrument. This means that an external
computer is controlling the instrument or the
instrument is controlled using digital inputs.
3 Exit Remote operation This command enables the keys and leaves
the remote operation.
10 Scale 1: Auto tare
11 Scale 1: Set to zero Used to set the gross weight to zero.
12 Scale 1: Select gross mode
13 Scale 1: Select net mode
14 Scale 1: Weight display Show weight on the display.
15 Scale 1: Flow rate display Show flow rate on the display.
16 Scale 1: Print command Initiate a weight printout
20 Scale 2: Auto tare
21 Scale 2: Set to zero Used to set the gross weight to zero.
22 Scale 2: Select gross mode
23 Scale 2: Select net mode
24 Scale 2: Weight display Show weight on the display.
25 Scale 2: Flow rate display Show flow rate on the display.
26 Scale 2: Print command Initiate a weight printout
30 Scale 3: Auto tare
31 Scale 3: Set to zero Used to set the gross weight to zero.