BLH NOBEL G4-DT, Техническое руководство

Страница: 81 / 194

G4 Multi Channel Weighing Instrument
3-45
Range/Alternatives Explanation and
<default value> result of alternatives.
Menu ‘Batching Parameters’
Batching parameters will only be shown if the Scale Batching Program Option is
enabled. See the ‘Scale Batching Program Option’ ‘Technical Manual Supplement’ for
a description of the Batching functionality and parameters.
Menu ‘Program Options’
This sub menu shows all available program options. In the standard program described
in this manual, Flow Rate calculation and Scale Batching are program options.
Program options must be activated with an option code to be functional. The option
code can be purchased from your instrument supplier.
To temporarily use the program option, enter the string ‘Demo’ (irrespective of
upper/lower case). This will allow to use the option for 14 days e.g. for try out.
Enter a ‘
−
’ to turn off the program option.
The program option can be used for several short periods but after a total use of 14
days it will be permanently turned off until a valid code is entered.
01: Flow rate
<
−
>
The option code necessary to activate the Flow Rate program
option always consists of 10 digits.
02: Scale batching
<
−
>
The option code necessary to activate the Scale Batching
program option always consists of 10 digits.
03: EtherNet/IP
<
−
>
The option code necessary to activate the EtherNet/IP program
option always consists of 10 digits.