BLH NOBEL G4-DT, Техническое руководство

Страница: 168 / 194

Technical Manual
7-14
Digital Outputs
Shows the status of all installed internal and external digital outputs. It is also possible
to change the status of the digital outputs.
Internal digital outputs are numbered 11 – 68. Each row corresponds to a slot. Only the
currently available outputs in each slot are shown.
External I/O outputs are numbered from 101 to 228. All 128 outputs are shown
regardless of how many outputs that are physically installed. Outputs are numbered
with 101 closest to the Fieldbus Coupler and successive outputs are numbered
consecutively regardless of type of I/O module (2, 4, 8 channels, relays etc).
The first field on each line is the outputs numbers for the line and the following digits
indicates status of the outputs. A ‘0’ indicates that the output is passive and a ‘1’ means
that the output is active.
If external I/O is enabled there will be three additional pages that can be shown by
clicking the ‘Prev.’/’Next’ buttons. The ‘Prev.’ and ‘Next’ buttons will only be shown if
external I/O is enabled.
If there are a communication error or other error regarding the external I/O dashes will
replace the digits indicating external output status.
An output is selected by clicking with the mouse on the desired output. A dashed frame
around the digit in the symbol indicates a selected output.
Press ’Toggle’ to force the selected output. The first time the button is clicked will set
the output in diagnostics mode keeping the current state. Each time the ’Toggle’ button
is clicked while in diagnostics mode will toggle the output. To restore the output to
normal operation click ‘Normal’ button. An output in diagnostics mode (manually forced
to a state) is marked with a grey background.
The screen is automatically updated every 2 seconds.
Digital Outputs diagnostics.